How to improve fiber laser marking machine, how to improve the efficiency of the mark, we set the parameters, the need for precise coordination, in order to achieve a more perfect laser marking. So what are the factors that can affect the efficiency of our fiber laser marking machine?
Mainly in the following points:
1. Fiber laser marking machine marking the degree of lightness
If the surface of the material marking the higher level, you need to increase the parameter configuration, increase the laser power, the depth of the mark will take a certain amount of time, leading to the overall slow marking speed.
Fiber laser marking machine laser beam focused spot
By focusing the mirror spot, the smaller the spot running speed, which is due to its small size. In practice, the spot quality may be slightly affected by other disturbances.
3. Fiber laser marking machine marks the size of the content
Large content marking, will make galvanometer deflected to maximize to meet the maximum marking. But this is much slower than marking less content.
4. Fiber laser marking machine marked density
Intensive marking relative to sparse marking speed for more time. Marking in the same format, sparse marking only 2 minutes, and intensive may take 5 minutes, after all, marking the higher density.
These are the main factors that affect the efficiency of fiber laser marking machine equipment, customers can set their own laser marking speed according to the needs of their products, does not affect the marking effect, to meet their own marking requirements!
Previous: QR Code