1) focal length on laser cutting machine laser cutting head is damaged goods, long-term use, lead to laser cutting head for damage.
2) every six months, check the fiber laser cutting machine track alignment and verticality of the machine, found to be in normal time debugging. Without doing this, it is possible to cut out the effect is not very good, error increases, affecting the cutting quality. This is the most important, and what must be done.
3) once a week with vacuum away dust and dirt within the machine, all the electrical cabinets should be shut to prevent dust.
4) always check the fiber laser cutting machine, must ensure the tension. Or a problem in the operation, likely will hurt people seriously can also lead to death. Steel with seemingly small things wrong is a bit severe.
5) fiber laser cutting machine of the guides should be cleaned regularly, to exclude dust and other debris, ensure a normal rack often wipe oil to ensure lubrication and free of debris. Rails should always be clean and grease, there is on the motor have always been clean and lube, machine in the road can walk better, more accurate cutting, cutting out product quality will be improved.