Follow us
Home > News > Content
Fiber Marking Machine | Tips For Cleaning Machines And Maintenance Precautions
Aug 25, 2018

First, consider what material to mark. Laser marking machines are available in a variety of types including fiber optics, YAG and CO2. For metal or non-metallic products, users should choose the most suitable type of marking machine.

Second, select the appropriate machine format based on the size of the product to be processed. For the choice of laser marking format size, the larger the machine size, the better. Large format equipment is certainly more expensive, so choosing the most appropriate format is correct.

Third, select the laser device according to the needs of the product to be processed. Laser equipment can be roughly divided into three types of engraving, cutting and marking in different ways of use. Basically, some are special machines, and some are various functions. They should be selected according to the main needs.

First, consider what material to mark. Laser marking machines are available in a variety of types including fiber optics, YAG and CO2. For metal or non-metallic products, users should choose the most suitable type of marking machine.

Laser cleaning machine rust removal 200w 500w

Second, select the appropriate machine format based on the size of the product to be processed. For the choice of laser marking format size, the larger the machine size, the better. Large format equipment is certainly more expensive, so choosing the most appropriate format is correct.

Third, select the laser device according to the needs of the product to be processed. Laser equipment can be roughly divided into three types of engraving, cutting and marking in different ways of use. Basically, some are special machines, and some are various functions. They should be selected according to the main needs.

Any machine must be carefully maintained and maintained, otherwise it will greatly reduce the service life of the machine. Therefore, Baifei CNC here summarizes some of the most important issues that the fiber laser marking machine needs to pay attention to during routine maintenance:

One: keep the indoor and machine surfaces clean and clean. Regularly check each optical lens for dirt (the duration depends on the working environment), and scrub if there is dirt in case of emergency. Scrubbing method: When cleaning the lens, be very careful. Before cleaning the lens, it is strictly forbidden to arbitrarily change the protection circuit and the main components of the laser.

Two: It is strictly forbidden to start the laser power supply and Q-switched power supply under the condition of no water or water circulation abnormality. It is not allowed to work abnormally when the Q power supply is no-loaded (that is, the output of the Q power supply is suspended). First, turn off the galvanometer switch and the key switch, and then Check that the laser power output (anode) is suspended to prevent ignition and breakdown with other electrical appliances.

Three: Keep the inner circulation water clean. Regular cleaning of the laser marking machine tank and replacement of deionized or pure water does not allow other components to be activated before the xenon lamp is ignited to prevent high pressure from entering the damaged component.

Four: Configure the laser chiller to effectively cool the module and Q head of the marking machine to prevent the marking machine from being overheated. In the process of use, the above matters should be observed and the laser equipment should be used correctly in order to prolong the service life and reduce the cost.