Laser laser engraving machine, also known as laser marking machine, is because people in different places have different names for this laser device. There are several common names for laser engraving machines, laser printers, and so on. Although the name is different, this laser marking machine is the main force driving the development of the laser industry. The laser marking machine is used in many places such as some hardware accessories and electronic components, and laser marking machines are used for marking. For cars, boats, machinery, equipment and other materials with more friction, use laser marking to achieve durable wear, better help the industry mark, etc.
1. The main factors affecting the fiber laser laser engraving machine are divided into two factors: internal factors and workpiece processing.
The internal factors mainly include the laser frequency, the laser spot pattern and the divergence angle of the beam, the laser power, and the assisted gas and material during the reasonable optical shaping and processing. The internal factors are mainly noticed during the selection of the previous model, and the opinions of the laser engineer should be followed to purchase.
Another factor mainly needs the customer to pay attention when processing, mainly the marking density, marking format, marking depth and laser spot size.
2. When the marking density is in the same range, the same spot, and the same depth, the higher the marking density is, the slower the corresponding marking speed will be. The reason is that the density directly increases the marking area.
3, marking the breadth Because large-format marking oscillating mirror deflection area, so the large-format marking speed is slower than the small format marking speed.
4. Marking Depth According to the demand, if the depth of marking needs to be deepened, the parameters of the fiber laser laser engraving machine need to be adjusted to increase the power, current and other factors of the fiber laser laser engraving machine, thus affecting these processes. Marking speed.
5. The smaller the spot size of the laser spot, the smaller the corresponding marking volume. Therefore, the larger the spot, the faster the marking speed.