Follow us
Home > News > Content
Laser Marker Effect Introduction
Mar 01, 2018

1. The laser processing system itself is a computer system, which can be conveniently arranged and modified. It has the functions of skipping numbers, random codes, etc. to achieve the unique code requirements of the product. It is suitable for personalized processing and processing of small batches and multiple batches. There are advantages. The

2. Laser processing for light contact, non-mechanical contact, no mechanical stress, it is particularly suitable for high hardness (such as cemented carbide), high brittleness (such as solar silicon), high melting point and high precision (such as precision bearings) special requirements Use on high occasions. The

3. Laser processing of energy density, time is short, heat affected zone is small, thermal deformation is small, thermal stress is small, will not affect the internal electrical properties. In particular, the 532μm, 355μm and 266μm lasers are cold-worked and are suitable for precision machining of special materials. The

4. Laser burning directly etch, a permanent mark, can not be erased, will not fail to deform off, suitable for anti-counterfeiting anti-fake goods, to achieve product traceability requirements. The

5. The labeling effect is exquisite, the craft is beautiful, the precision is higher, can improve the product grade, increase the product added value. The

6. The line width can be as small as 10μm, depth up to 10μm or less, can be "millimeter" size parts of the surface of the mark. The

7. Low-consumption materials, no pollution, energy saving and environmental protection, in line with European environmental standards, in line with the GMP requirements of the pharmaceutical industry. The

8. Processing costs low. One-time investment in equipment is expensive, but continuous, large-scale processing eventually reduces the processing cost of each part. The

9. Flexible processing methods. The internal workpieces can be processed through a transparent medium, which is easy to guide, focus, and achieve a change of direction, which can easily cooperate with the numerical control system.